Plaats een Review
2.5-9V Fine-Adjust Step-Up/Down Voltage Regulator S9V11MA Pololu 2869
The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.
- Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
- Output voltage: 2.5 V to 9 V (precision-adjustable using built-in 12-turn potentiometer)
- Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
- Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
- Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when regulator is disabled)
- Integrated over-temperature and short-circuit protection
- Small size: 0.5″ × 0.6″ × 0.25″ (12.7 × 15.3 × 6.4 mm)
Voor meer info klik hier Hier
- EAN Barcode : 9508772822772
€ 30.33
| Webshop | Prijs | Kopen |
| Bol.com
2 |
|
2.5-9V Fine-Adjust Step-Up/Down Voltage Regulator S9V11MA Pololu 2869
The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.
- Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
- Output voltage: 2.5 V to 9 V (precision-adjustable using built-in 12-turn potentiometer)
- Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
- Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
- Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when regulator is disabled)
- Integrated over-temperature and short-circuit protection
- Small size: 0.5″ × 0.6″ × 0.25″ (12.7 × 15.3 × 6.4 mm)
Voor meer info klik hier Hier
| Merk | Pololu |
| Inhoud | 2.5-9V Fine-Adjust Step-Up/Down Voltage Regulator S9V11MA Pololu 2869 |
| Introductie jaar | 2023 |
| Leeftijd | |
| EAN | 9508772822772 |
| Sku | 4521989 |
-Pololu-1996-9501764479350.jpg "Aluminum Mounting 3mm Shaft, (2-Pack) Pololu 1996")
-Pololu-3767-9507671683279.jpg "DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit (Header Pins Soldered) Pololu 3767")
-Pololu-5064-9503888698327.jpg "Motoron M2T256 Dual I2C Motor Controller (Header Pins Soldered) Pololu 5064")
-Pololu-5066-9504458493489.jpg "Motoron M2U256 Dual Serial Motor Controller (Header Pins Soldered) Pololu 5066")
